最新情報のメール配信に登録する
新製品、キャンペーン、世界各地のユーザー様による作品などの情報をお届けするウッドマイザーのニュースレター(無料)に是非ご登録ください
新製品、キャンペーン、世界各地のユーザー様による作品などの情報をお届けするウッドマイザーのニュースレター(無料)に是非ご登録ください
Single end power feed pallet trim saw with 10 HP electric motor, 50mm to 1.7m long material capacity up to 50mm thick and 254mm wide, inclined table, overhead blade design, powered variable feed rate, and 4 adjustable board stops with scale.
The PC200 Single End Power Feed Trim Saw is engineered to efficiently trim the ends of deck boards and stringers for manufacturing recycled pallets. Ideal for pallet recycling and remanufacturing operations, the PC200 trims the ends of boards from 0.5m (21”) to 1.7m (66”) long, up to 50mm (2”) thick and 254mm (10”) wide at rates of up to 12,000 boards per 8-hour shift. The PC200 features an overhead blade design for reduced board kickback, electronic variable feed speed for optimum production, and a gravity-assist incline feed system for efficient material flow. A typical pallet recycling system will include 2 or 3 Pallet Hawg® Pallet Dismantlers for each PC200 Single End Power Feed Trim Saw in order to dismantle a pallet and trim boards into smaller material for assembly of a recycled pallet.
Operation
With the easy to read scale, four quick-adjust board stops are set from 0.5m (21”) to 1.7m (66”) at the desired board lengths. The operator turns on the blade motor and power feed with a single on/off switch and adjusts the variable feed speed for optimum efficiency. Boards at varying lengths are loaded onto the gravity-assist incline table that includes three heavy-duty #2060 roller feed chains with 305mm (12”) spacing. The lugs on the chains move boards up the table through the 18” diameter nail-resistant carbide-tipped blade and one end of the board is trimmed. Next to the blade, trim cuts from each board are dropped onto a conveyor system or into a container for recycling. Trimmed boards continue moving up the incline table to the 1.5m (58”) drop height and drop onto a sorting table or into a bin for further processing. Blades are able to be resharpened and changing a blade is easy with the removable blade plate. For added safety features, all chain sprockets are enclosed below the table, two emergency stops are located on the machine, and a convenient reversing switch assists with jammed material.
Built in the USA, the PC200 Single End Power Feed Trim Saw is backed by the same level of service, quality, and safety features shared by the entire family of Wood-Mizer wood processing and pallet recycling equipment.
Features
選択可能な動力源 | |
---|---|
選択可能な動力源 | 7.5kW (10HP) 1PH Electric 7.5kW (10HP) 3PH Electric |
Capacities | |
最小木材長さ | 533mm |
最大木材長さ | 1,676 mm (66") |
最大板厚 | 51mm |
鋸刃 | |
Blade Design | Overhead 457mm (18") diameter carbide-tipped circular blade |
Features & Operation | |
フィードモーター | 1/2HP with gear reduction |
自動送りシステム | 3 x #2060 roller feed chains with lugs and 304mm (12") spacing |
送り速度 | Variable from 0-305mm/second (0 - 1 foot/second) |
Table Design | Gravity-assist inclined with 1.45m (58") drop height |
Board Stops | 4 adjustable stops with scale |